Accurately measure the weight of the materials passing through the conveyor belts with the belt weighing system!

Conveyor weighing with an accuracy of Half percent

Weighing materials passing through the conveyor belt dynamically

Belt weighing with Multiple load cells

Increasing the accuracy of weight measurement with the geometric arrangement of load cells in conveyor weighing systems

Stability of conveyor weighing system

Stability of the weighing system in different conditions for conveyor belts

Exclusive suspension frame

Suspended mechanical frame in order to prevent lateral vibrations from affecting the dynamic weighing system

Modular design of conveyor weighing system

The weighing system is designed in such a way that installation and operation can be done with minimal line stops

Easy maintenance of the weighing system

The modular design of weighing systems of Behine Sazan Group will reduce the time of repairs and maintenance
Dynamic weighing – connection to industrial networks
Conveyor weighing with several built-in counters
Conveyor weighing with analog output and connection to PLC
Belt weighing – installation on conveyor belts up to Two thousand four hundred mm wide
Dynamic weighing with the ability to install on inclined conveyor belts up to thirty five degrees
سیستم توزین دینامیک

Conveyor weighing suspended frames with Multiple load cells

سیستم توزین با 4 لودسل

  • Suspended frame for conveyor weighing in order to reduce the impact of lateral forces and accurate weight measurement

  • Dynamic weighing with the ability to install on conveyors with a speed of one tenth to three meters per second

  • Accurate calibration of the dynamic weighing system along with full training for the machine operator

load cell with IP Protection

لودسل سیستم توزین دینامیک

View the report of the dynamic weighing system in real time and on the basis of industrial networks and the Internet

Speedometer Wheel

چرخ انکودر سیستم توزین نوار نقاله

Intecount Plus Indicator

نمایشگر سیستم توزین نواری

JBOX

جانکشن باکس

Changing and Replacing Systems and Equipment of Old Weighing Systems

Among the most important replaced systems, the following can be mentioned:

  • Replacement of SCHENCK systems

  • Replacement of Pfister systems

  • Replacement of Hasler systems

  • Replacement of Milltronics systems

  • Replacement of Ramsey systems

Receive the technical and financial proposal of the conveyor belt weighing system

In order to receive a technical and financial proposal regarding the conveyor belt weighing system, it is first necessary to provide the specifications of the desired project, such as transfer capacity (tons per hour), conveyor speed, type of desired material, etc. to the technical unit of Behine Sazan Group  so that the relevant proposals can be announced as soon as possible